Automated Solutions
Integrated Solutions for Off-Site Construction
Increase plant efficiency, reduce labour costs, and offer predictable performance with off-site solutions and prefabrication technology. Achieve higher productivity and profitability for your business and deliver consistent, high-quality products for your customers.
MatchPoint® DirectDriveTM
Increase the productivity of your component manufacturing operation with our MatchPoint® DirectDrive™ system. Combine with our Ranger® lumber retrieval system, MatchPoint® BLADE™ wood processing system, CDS™ component delivery system, and Wizard PDS® perimeter definition system to create a highly integrated and efficient automated component manufacturing workflow that will quickly scale your operations capability.
Cutting
Utilise MiTek’s wood processing equipment to achieve unmatched reliability and accuracy with your floor trusses, roof trusses, and wall panels.
Uppercut Rotary Saw
The Upper Cut Rotary Saw is a high volume single operator, truss component saw.
AngleBrace Rebater
The AngleBrace Rebater is recommended for the rebating of timber on wall frames to accommodate MiTek bracing.
MatchPoint® BLADE™
The MiTek MatchPoint Blade is a high capacity, high accuracy, single bladed linear saw designed to cut truss and frame components.
Material Handling
An efficient off-site component manufacturing operation requires integrated systems that can keep up with demand shift after shift. MiTek’s material handling solutions are fast and effective, so your productivity never slows down.
Mitek Trolley Range
A general purpose unit, designed for transportation and storage of truss components between the cutting and jigging stations
Mitek IO Link
Designed as an add on to MiTek OptiFlow software to connect up to six inputs/switches to a PC via a simulated keystroke.
Virtek Iris Truss
Makes prefabricated timber truss manufacturing so easy that even less experienced workers are instantly productive.
MatchPoint DirectDrive
The DirectDrive system uses the power of software to automate the feeding, cutting, and moving of boards to tables, where automated jigging minimises set-up time for each truss.
Assembly
Bring it all together with tables, jigging, lasers, and more for seamless roof truss, floor truss, and wall panel assembly. Integrate with MatchPoint® DirectDrive™ for an end-to-end plant automation solution.
BeautPress Trojan
For the manufacturing of complex trusses and short runs, the BeautPress Trojan comes complete with simple jigging hardware to reduce set-up time.
BeautPress Xpress
The BeautPress Xpress is an Australian built, platen style floor truss press. It is available in a 600mm wide version for a single set up for floor truss construction or a 1200mm wide version with dual, back to back setup stations.
Gantry Press
The MiTek Gantry press is designed to work with flow-through style jigs, providing the pressing capably to any jig setup.
Jack Table
The MiTek Jack Table is a quick and nimble platen press ideally suited to the construction of small trusses: jacks saddles, creepers, etc.
Portal Press
The Portal Press & Flo-Jig System is ideal for small to medium size truss plants. The MiTek Portal press is designed to work with flow-through style jigs, providing the pressing capably to any jig setup.
Portable Site Press
These highly flexible portable nail plate presses are ideal for rectification work on building sites, and pressing plates off the main production line.
RailRider® Pro
Designed specifically for floor truss assembly, this press accomplishes 100% plate embedment on each pass.
RoofTracker III™ Roller Gantry
A high-powered roller press that presses the top and bottom plates in a single pass.
BeautPress Trojan
For the manufacturing of complex trusses and short runs, the BeautPress Trojan comes complete with simple jigging hardware to reduce set-up time.
Gantry Press
The MiTek Gantry press is designed to work with flow-through style jigs, providing the pressing capably to any jig setup.
Jack Table
The MiTek Jack Table is a quick and nimble platen press ideally suited to the construction of small trusses: jacks saddles, creepers, etc.
Portal Press
The Portal Press & Flo-Jig System is ideal for small to medium size truss plants. The MiTek Portal press is designed to work with flow-through style jigs, providing the pressing capably to any jig setup.
Portable Site Press
These highly flexible portable nail plate presses are ideal for rectification work on building sites, and pressing plates off the main production line.
FloJig
Pedestal style jigging for manufacturing roof trusses
JigRight
JigRight is truss jigging software created to control and improve the performance of automated table jigging.
KwikSet Jig
The KwikSet Jig is a rapid setup jib with flow-through style boxes.
Wizard PDS®
The Wizard PDS® – Perimeter Definition System is a fully automated jig system that reduces truss set up time by 99%.
Virtek Iris Truss
Makes prefabricated timber truss manufacturing so easy that even less experienced workers are instantly productive.
Jack Table
The MiTek Jack Table is a quick and nimble platen press ideally suited to the construction of small trusses: jacks saddles, creepers, etc.
Are you ready to increase reliability, flexibility, and productivity throughout your component manufacturing operation?
Talk to one of our automation experts to learn more.